Supply Chain and Industry Guides for Polyester Knits
A polyester knit fabric is the last link of a chain that begins at the oil refinery. These seven guides map that chain. They show who produces the yarn, where Turkey sits, which supplier layer to address, what sets the minimum order and lead time, what wet processing costs in water and energy, and how facilities are audited.
This category deals with the structure behind a fabric rather than the fabric itself. The base cost of polyester yarn comes from the oil-linked spreads between PX, PTA and MEG, and neither the buyer nor the knit mill sets them. Lead time, shade consistency and traceability, by contrast, are decided in the wet processing and inspection that a fabric mill runs itself. The guides keep these two areas apart, so that a buyer can see which questions a supplier can answer and which ones depend on the commodity cycle.
The seven guides move from the global chain down to a single order. Start with the value chain and the producer map, then read where Turkey sits on that map and how a fabric mill differs from a garment manufacturer. The last three guides explain what sets the minimum quantity and lead time of a colour, how much water and energy one kilo of dyed knit uses, and what facility certificates prove about the plant behind the fabric.
Decisions made in this category
| Decision | What to check |
|---|---|
| Where in the chain does a buyer have leverage? | Lead time, shade consistency and traceability, managed in wet processing and inspection rather than in the oil-linked upstream spreads From Chip to Cloth: The Value Chain and Where the Margin Sits |
| How concentrated is the supply behind the yarn? | China’s share of polyester filament yarn (PFY) capacity and staple fibre (PSF) output, and the integrated refinery-to-yarn groups Where the World’s Polyester Actually Comes From: Producers and the Value Chain |
| For which orders is Turkey the right source? | 0% EU duty under the 1996 Customs Union, 3–5 day truck delivery, in-season replenishment, small colour lots and traceability Turkey’s Polyester and Knit-Dye Industry: Upstream Depth, Clusters and the Structural Moat |
| Should the request go to a fabric mill or a garment manufacturer? | What is sold and in which unit (rolls by the kilogram or garments by the piece), what sets the minimum and who approves the colour Knit Mill or Garment Manufacturer: Choosing in Turkey |
| What sets the minimum quantity and lead time of a colour? | The dye lot that fills an HT dyeing machine at a fixed liquor ratio, and the lab-dip approval cycle where lead time actually starts What Really Sets MOQ and Lead Time: Dye-Lot Math |
| How is a supplier’s water and energy claim compared? | Machine liquor ratio, shade depth, right-first-time (RFT) rate and heat and water recovery tier, rather than a single litres-per-kilo figure The Water and Energy in One Kilo of Dyed Polyester Knit |
| Which certificate shows how the factory is run? | Facility schemes such as STeP, ZDHC, verified Higg FEM, bluesign and ISO 14001/50001, read in a column separate from product certificates STeP, ZDHC, Higg, bluesign: What Facility Certifications Actually Prove |
Key facts
- A re-dye roughly doubles a lot’s water, energy, chemical and machine occupancy. A right-first-time (RFT) rate of ~90%+ is therefore structurally cheaper than ~70%. From Chip to Cloth: The Value Chain and Where the Margin Sits
- According to Textile Exchange data, polyester made up ~57–59% of the ~132 Mt of global fibre production in 2024, a volume of ~78 Mt (representative, varies by annual report). Where the World’s Polyester Actually Comes From: Producers and the Value Chain
- By industry estimates, China holds ~75–80% of global polyester filament yarn (PFY) capacity and more than ~65% of staple fibre (PSF) production (representative figures). Where the World’s Polyester Actually Comes From: Producers and the Value Chain
- Under the 1996 Customs Union, fabric of Turkish origin enters the EU at 0% duty, while Far-East sourcing typically faces ~9–12%. Truck delivery to Europe typically takes 3–5 days, and sea shipment from Asia ~25–35 days. Turkey’s Polyester and Knit-Dye Industry: Upstream Depth, Clusters and the Structural Moat
- A fabric mill sells rolls by the kilogram, sometimes by the metre, and its minimum is set per colour by the dye lot. A garment manufacturer’s minimum is measured in pieces and in the size-colour breakdown. Knit Mill or Garment Manufacturer: Choosing in Turkey
- An HT dyeing machine runs at a fixed liquor ratio, so loading it far below capacity raises the cost of water, energy and chemicals per kilogram. A practical minimum lot therefore emerges for each colour, representatively on the order of a few hundred kilograms per shade. What Really Sets MOQ and Lead Time: Dye-Lot Math
- Conventional mid-shade knit dyeing typically draws ~70–150 litres of water per kilogram. A well-designed low-liquor modern line can bring this into the ~30–60 L/kg band (representative ranges). The Water and Energy in One Kilo of Dyed Polyester Knit
- OEKO-TEX STeP assesses a production facility across six modules, from chemical management to health and safety. Under the ZDHC Wastewater Guidelines, discharged wastewater is tested typically twice a year and the results are published as a ClearStream report. STeP, ZDHC, Higg, bluesign: What Facility Certifications Actually Prove
Reading order
- From Chip to Cloth: The Value Chain and Where the Margin Sits — Maps the full polyester chain from PX to garment and its two separate truths: margin sits mostly in the oil-linked upstream commodity spreads, while lead-time and quality risk concentrate in the wet processing and inspection a fabric mill actually owns. Shows why vertical integration (knit + dye + finish under one roof) turns this to advantage. At the last link of the chain, quality is measured by ASTM D5430 inspection and ISO 105 fastness.
- Where the World’s Polyester Actually Comes From: Producers and the Value Chain — Polyester is the world’s largest textile fibre (~59% share, ~78 Mt in 2024). Your yarn is the last link in an integrated chain that runs from oil refinery to fibre — this guide maps that chain and the real producers who run it. The fabric at the end of that chain is delivered under ASTM D5430 inspection and ISO 105 fastness.
- Turkey’s Polyester and Knit-Dye Industry: Upstream Depth, Clusters and the Structural Moat — Turkey is one of the few vertically integrated textile economies, running from petrochemicals (SASA’s PTA plant, Korteks’s integrated filament) down to the knit-dye belts of Çorlu/Ergene, Bursa, Gaziantep and Denizli. Its edge is not cheapest volume but speed and replenishment, built on the Customs Union’s 0% duty and 3-5 day truck delivery.
- Knit Mill or Garment Manufacturer: Choosing in Turkey — Supplier lists collapse two different businesses into one heading: the mill that turns yarn into fabric, and the garment manufacturer that buys fabric and sews clothing. They sell different things, price in different units and carry different risk. This guide separates them, shows why “vertically integrated” no longer carries information on its own, and reduces the choice to six questions.
- What Really Sets MOQ and Lead Time: Dye-Lot Math — What sets the minimum order quantity and lead time for a colour is not knitting capacity; it is the economics of the minimum dye lot that fills a machine, plus the lab-dip approval cycle. All week and quantity figures are representative. The approved lot passes ASTM D5430 four-point inspection and ISO 105 fastness checks.
- The Water and Energy in One Kilo of Dyed Polyester Knit — The real water and energy cost of one kilo of dyed polyester knit — honest, representative ranges and the levers that actually cut them: low-liquor/airflow dyeing, heat recovery, right-first-time shade, ETP + RO recovery, and ZLD. Auditing that cost runs through ZDHC, OEKO-TEX STeP and ISO 14001.
- STeP, ZDHC, Higg, bluesign: What Facility Certifications Actually Prove — A product certificate documents a fabric; a facility certificate documents a factory — they answer different questions. A buyer must hold this distinction to read OEKO-TEX STeP, ZDHC, Higg/Cascale FEM, bluesign and ISO 14001/50001 correctly.
Frequently asked questions
Do you make finished garments (cutting, sewing, printing)?
No. Fersan is a knitted fabric mill that produces from yarn to dyed fabric. We do not cut, sew or print. We sell the fabric to the brand or to the garment maker the brand works with.
Can I buy fabric below the minimum order quantity?
Small quantities can be sold from fabrics and colours we hold in stock. For a custom colour or a custom fabric, the minimum order applies per colour. You can send your request with the quantity and colour through the quote form.
How do I request samples, a colour card or hangers?
Send your request through the quote form with the fabric, colour and end use. The sales team reviews sample and colour card requests according to the fabric, colour and quantity, and gets back to you.
Why is the minimum order set per colour?
What sets the minimum order quantity for a colour is not knitting capacity but the economics of the minimum dye lot that fills a dyeing machine. Lead time is set by that lot together with the lab-dip approval cycle.