TECHNICAL DATA SHEET

Melange (Heather) Polyester French Terry

Download PDF
Melange (Heather) Polyester French Terry
Melange (Heather) Polyester French Terry · French Terry
Melange (Heather) Polyester French Terry — TECHNICAL DATA SHEET
Weight160–320 g/m² (4.7–9.4 oz/yd²)

In family: 150–350 g/m² · 4 fabrics

Composition100% polyester melange yarn (a blend of differently coloured fibres → heathered); grey melange is most common. Cotton-PES melange also exists.
Knit typeMelange (heather) French terry · French Terry
Use classEveryday
StretchMechanical stretch
KnitSame standard loop-back knit; the difference is in the yarn — knitted with melange (mixed-colour) yarn for a grainy/heathered surface colour.
HandSame hand as standard French terry; visually speckled/heathered, matte and natural.
Typical useMelange sweatshirts · grey-melange hoodies · joggers · daily tops
StrengthMelange yarn gives a richer, grainier look than solid dye and disguises small stains/wear.
Watch forLot-to-lot tone consistency can be hard since colour comes from the yarn; it affects only the look, not warmth/durability.
CertificationsISO 9001ISO 10002ISO 14001ISO 45001ISO 50001STANDARD 100OEKO-TEX STePGRS · RCSHigg FEMHigg FSLM

Width, gauge, finishing options and test standards are shared on request.

Typical technical ranges

Melange (Heather) Polyester French Terry — Typical technical ranges
Weight tolerance±5% (±6–7% on heavy/brushed variants)
WidthOpen width typ. 150–200 cm; tubular typ. 70–100 cm (half-circumference). Varies with cylinder diameter (30–34″)/gauge and finished-width setting
Shrinkage (wash)After-wash dimensional change typ. width −3 to −7%, length −3 to −7% (heat-set + compacting pulls toward the lower end; predominantly shrinkage direction). No hygroscopic shrink in 100% PES; looped-back relaxation can run slightly above plain jersey
Color fastnessWash 4–5; rubbing dry 4–5, wet 3–4; light 4–6 (deep/bright and turquoise/navy shades may drop wet-rub to 2–3 and light to the lower end). Typical for disperse-dyed PES
Abrasion / pillingMartindale abrasion typ. 20,000–40,000+ cycles; pilling ISO 12945 grade 3–4 (looped-back floats make it slightly more pill-prone than flat jersey; brushed variant can drop to 2–3)
Gauge / yarnMachine gauge typ. E18–E24 (medium); feed yarn typ. 75–150 denier PES filament (150–300 denier on heavy variants). Finer/sporty toward E24, heavy sweat-fabric toward E18

These ranges are industry-TYPICAL / indicative values based on construction and fiber, not Fersan’s binding QC measurements. Exact values are confirmed per order, approved sample and lot-based QC report.

Trade & dispatch

Trade & dispatch
HS heading6006.32 — Other knitted fabric, of synthetic fibres, dyedUnbleached or bleached shipments: 6006.31
OriginTürkiye — Çorlu, Tekirdağ
PackagingRolls wound on a cardboard core in a PE bag; roll size planned around container fill
Shipping documentsCommercial invoice · packing list · A.TR movement certificate · transport document
Delivery termsEXW · FOB · DAP — shipping plan confirmed with your quotation

The HS heading is indicative; final classification is made by the customs broker based on the sample’s composition, width and finish.

Related reading: Fleece and Scuba: Structured Polyester Knits · Brushed, Unbrushed and Fleece: Where Warmth Comes From in Polyester Knits

Related calculators: Fabric weight calculator: construction to estimated GSM · Yarn consumption per fabric calculator · Waste & Efficiency Calculator — Required Input Quantity

Programmes we use this fabric in: French Terry Fabric Manufacturer — Türkiye

Other fabrics in the same family: Polyester French Terry 150–320 · Brushed (Fleece-Backed) Polyester French Terry 220–350 · Polyester French Terry with Elastane 190–320

Frequently asked questions

What weight range is Melange (Heather) Polyester French Terry produced in?

160–320 g/m² (4.7–9.4 oz/yd²). In family: 150–350 g/m². Weight, composition and color options are defined per request; contact us for samples. The weight ranges are Fersan’s production window; exact figures are confirmed by order and approved sample.

What is Melange (Heather) Polyester French Terry made of and how is it knitted?

100% polyester melange yarn (a blend of differently coloured fibres → heathered); grey melange is most common. Cotton-PES melange also exists. Same standard loop-back knit; the difference is in the yarn — knitted with melange (mixed-colour) yarn for a grainy/heathered surface colour.

What is Melange (Heather) Polyester French Terry used for?

Melange sweatshirts · grey-melange hoodies · joggers · daily tops. Melange yarn gives a richer, grainier look than solid dye and disguises small stains/wear. Lot-to-lot tone consistency can be hard since colour comes from the yarn; it affects only the look, not warmth/durability.

What are the minimum order, lead time and delivery terms?

Minimum order (MOQ): 500–1,000 kg per colour — varies by fabric · Lead time: Typically 3–4 weeks from order confirmation to dispatch · Sampling: Sampling begins after a short technical consultation · Response time: Quotation requests answered within 2 business days · Delivery terms: EXW · FOB · DAP — shipping plan confirmed with your quotation.

Fersan Tekstil · www.fersantekstil.com · +90 212 875 43 13
Request a sample or quote

On this page

Top